Replace or check keel axis

Concerning pogo 10.50 (I don’t know for other models), Pogo Structures has noticed that over time the hydraulic cylinder axis could move and thus damage the keel well. Indeed, the stainless steel circlips that block this axis can deteriorate or move. Pogo Structures advises to check the condition of these by looking through the small plexiglass window on the starboard side.

You have two solutions:

1. Replace the two circlips with new ones (you also have to remove the cylinder axis to change the bottom one, the operation can be tricky)
   
2. Pogo Structures made a modification on the axis to block it with a screw on both sides it offers you a kit including a modified cylinder axis + 2 plexiglass portholes for 120€ including tax and shipping costs to Europe. Detailled instructions are attached below (in french).

See pogo10.50 cylinder axis replacement instructions