Expansion tank (pressurized water)

[Emmanuel (Dranga)]

I added an expansion tank on the pressurized water circuit: it avoids jerks on the pump, if you run the water very slowly, to save money. Very efficient, it is not too complicated to implement as long as you have some PER pipe and connectors.  On the Pogo, it is a British material (PEX Barrier), in 15mm, while the PER building is commonly available in 12mm or 16mm. A big thank you to Seb from the yard for providing me with the necessary material.

I screwed the vase directly into the panel, next to the filter. If it doesn’t fit, I will put bolts through the wall. I turned the tee under the filter horizontally, and I tilted the vase slightly to avoid bumping into the electrical duct on the ceiling.

[Author]

Posts