Check or replace the axis between the cylinder and the keel
Viewing 1 post (of 1 total)
-
Posts
-
Pogo Structures has noticed that over time the hydraulic cylinder axis could move and thus damage the keel well. Indeed, the stainless steel circlips that block this axis can deteriorate or move.
Pogo Structures therefore advises you to check the condition of the circlips by looking through the small plexiglass porthole on the starboard side.
You have two solutions:
1-Replace the two circlips with new ones
(You also have to remove the cylinder axis to change the bottom one, the operation can be tricky)
2-Pogo Structures made a modification on the axis to block it with a screw on both sides and offer you a kit including a modified cylinder axis + 2 plexiglass portholes for 120€ including tax and shipping costs to Europe.
Viewing 1 post (of 1 total)
- You must be logged in to reply to this topic.
